TPMS - Tire Pressure Monitoring System Pairing Guide

How to operate

1. Install the smart screen and motorcycle hardware.

2. Turn on the motorcycle and the smart screen. Click Home “F” or B" in the lower left corner

3. Enter the TPMS system, click the Binding sensor button and enter the TPMS selection state.

4. Select F and click Confirm for front wheels to enter the search state, install the sensor on the front wheel, the sensor detects the air pressure, the smart screen will display the air pressure value, and the binding is successful.

5. Select B and click confirm all. The rear tire enters the search state. Install the sensor on the rear wheel. The sensor detects the air pressure, and the smart screen will display the air pressure value. The binding is successful.

6. When binding the second sensor, the first sensor must be removed from the tire. After the second sensor is successfully bound, the first sensor can be installed on the wheel.

Unbinding Method:

• Sensor unbinding method: Enter the TPMS binding state. Click the Binding sensor button,

select Unbind all, and then click Confirm. The sensor is unbound successfully.

• The maximum air pressure of the sensor cannot exceed 4Bar.

• The TPMS system will alarm when the air pressure is lower than 1.6Bar, and it will alarm when the air pressure is higher than 3.2Bar.